IKEA TRIXIG - Product Operation and Charging; Battery Charging Status Indicators; Usage and Charging Tips

5
English
TRIXIG screwdriver/drill Li-ion 12V
TECHNICAL SPECIFICATIONS - SCREWDRIVER/DRILL
Model: TRIXIG
Type: P2202
Nominal voltage: 10.8V d.c.
Rated voltage 12.0V d.c.
Battery type: 1.5 Ah Lithium-Ion
Charging time:
If you use 5.0V 1.0A charge current – charging time < 360 min
If you use 5.0V 2.0A charge current – charging time < 210 min
If you use 5.0V 3.0A charge current – charging time < 150 min
Chuck capacity: 0.8 - 10 mm (1/32"-3/8")
Adjustable torque: 19 + drilling
Max. hard torque: approx. 16 Nm
Max. rpm (no-load speed): 900/min
Holder for screwdriver bits: 6.35 mm (1/4")
Weight: approx. 1.035 kg (2.282 lbs) (drill+battery pack only)
Vibration (according to EN 62841-1, EN 62841-2-1.:
Drilling into metal
a
h.D
=1.1 m/s², K=1.5 m/s²
Noise (according to EN 62841-1.:
Noise pressure level L
pA
= 69 dB (A), K
pA
= 5 dB (A)
Noise power level L
wA
= 80 dB (A), K
wA
= 5 dB (A)
Technical data
Type: ICBL 10.8-16-USBC-P1
Capacity: 1.5Ah Lithium-Ion, 16.2Wh
Rechargeable Li-Ion battery cell inside.
(Three INR19/66 Li-ion cells connected to a group in series)
INDOOR USE ONLY.
Recommended charging ratings:
5.0V d.c. / 1.0-3.0A (type C), charging temperature 0-50℃
Product features
The numbering of the product features shown refers to the illustration of the screwdriver/drill
on the graphic page.
1. Keyless chuck
2. Torque regulator
3. Innitely variable speed control/trigger
4. Rotational direction switch
5. LED work light
6. Battery pack
7. Front sleeve
8. Magnetic bit holder
NOTE!
USB-C cable and USB charger are not included.
There is an additional storage compartment inside the screwdriver/drill’s box for a
supplementary TRIXIG battery pack.