4ENGLISH
CLEAN AND CARE
Limescale deposits
• Clean with a soft cloth dampened with
water and a mild washing-up detergent
or soap. Never use scouring powder,
steel wool or a detergent that is calcium-
dissolving, sour or contains alcohol or an
abrasive. Rinse with water and dry/polish
with a clean dry cloth.
• To remove larger limescale deposits – use
diluted, ordinary white vinegar and rinse
with water.
Cleaning nozzles of head and hand
showers
• Rub away limescale deposits with your
hands.
Filter/aerator
• We recommend unscrewing the product’s
lter/aerator and cleaning it now and then.
If the lter/aerator is calcied – wash it
with diluted, ordinary white vinegar.
CARE INSTRUCTIONS
• Turn the thermostat from full cold to full hot
from time to time.
• Check the temperature control on a regular
basis, adjust if necessary according to the
assembly instructions.
• Check the washers on a regular basis.
TROUBLESHOOTING
Water pressure is too low
Possible causes:
• Low pressure in the water pipes.
─ Check the water supply and make sure it
works as it should.
• Filter/aerator is blocked or dirty.
─ Clean the lter, see above.
• The nozzle is blocked or dirty.
─ Clean the nozzle, see above.
To Next Page
Loading...
