IKEA VOXNAN - Water Temperature Issues; Temperature Variations; Leaking Components; Joint Leaks and Washer Problems

5
Water temperature is lower/higher
than the pre-set
Possible causes:
• The thermostat needs to be adjusted.
─ Follow the assembly instructions.
• The temperature of the water in the pipes
is too low.
─ Check the temperature of the incoming
water and adjust the hot water temperature
according to the user instructions.
• The thermostat does not regulate the water
temperature correctly.
─ The regulation of hot and cold water is not
set correctly, see the assembly instructions.
─ Check and correct the temperature of the
incoming water.
• The thermostat’s cartridge is defective or
worn out.
─ Contact a qualied technician to replace the
cartridge.
Leaking from joints between various
components
Possible cause:
• The washers are not xed in place correctly
or are damaged.
─ Check that the washers are xed in place
correctly and according to the assembly
instructions.
─ Replace damaged washers.