iKey BT-87-TP User Manual (English)

To Next Page



Microsoft Bluetooth

Pairing Instructions

The recommended software that has proven compatibility with

the BT-87-TP is Toshiba’s Bluetooth

Stack for Windows. In

order to connect your BT-87-TP to your computer, you will

need an input device already connected to your computer.

This will allow you to have your computer search for the

BT-87-TP.

1.Make sure that the Bluetooth

Radio in your PC or laptop is

enabled and able to pair with other devices.

2.Open your computer’s Bluetooth

Settings window (Start )

Control Panel ) Bluetooth

) Bluetooth

Settings)

3.Place the BT-87-TP in ’discoverable’ mode by holding the

Pair button down until the ‘Pair’ LED (located at the lower right

hand side of keyboard) blinks three times, then release the

Pair button. The Pair LED will then continue to blink steadily

until the unit is paired with the computer.

4.In the Bluetooth

Settings window, select New Connection

or Add (depending on your software). If your software gives

the option, choose Express discovery mode then click Next.

5.Once the list of available devices shows up, select the

device titled ‘iKey’.

6.Depending upon your Bluetooth

driver, your computer may

require you to enter a passkey or device code. If available,

use the automatically generated/assigned code option. Enter

in the 4 to 6 digit numeric code that is on screen using the

dedicated number keys located above the QWERTY row on

your BT-87-TP. Press the Enter key on your iKey Unit.

7.Your computer will go through an automated New Hardware

Found process. You will probably get a notification that the

New Hardware is ready to use. Your BT-87-TP is now paired

with your computer and is ready to use!

Mac Bluetooth

Pairing Instructions

iKey’s BT-87-TP unit is compatible with Mac computers that

have built in Bluetooth

functionality. The Windows key on our

keyboard layout functions as the Apple Key that is on a

standard Mac keyboard. There is also Right click functionality

with the BT-87-TP right mouse button. This is essentially a

Ctrl + Click that is the standard Mac function equivalent to a

Windows right click.

1.Click on the Bluetooth

icon on the taskbar at the top right of

the home screen.

2.Make sure the Bluetooth

is turned on.

3.Select “Set up Bluetooth

Device”.

4.Select “Continue”.

5.Select “Keyboard” then Continue.

6.Place the BT-87-TP in ‘discoverable’ mode by holding the

Pair button down until the ‘Pair’ LED (located at the lower right

hand side of keyboard) blinks three times, then release the

Pair button. The Pair LED will then continue to blink steadily

until the unit is paired with the computer.

7.Select “iKey” from the list of keyboard devices that will

appear on your screen and click “Continue”.

8.Enter the numeric code given by the wizard using the

BT-87-TP unit then press the “Enter” key.

9.Follow the on screen prompts to identify what type of

keyboard you are using (English, EU, or Japanese).

10.Your iKey BT-87-TP is equivalent to the US English

101/102 keyboard.

11.The unit will then be paired with the Mac and ready for use

Other manuals for iKey BT-87-TP

Instructions2 pages

Need help?

Do you have a question about the iKey BT-87-TP and is the answer not in the manual?

iKey BT-87-TP Specifications

General

Category	Keyboard
Manufacturer	iKey
Model	BT-87-TP
Connectivity	Bluetooth
Battery Life	Up to 3 months
Operating Temperature	-40°C to +70°C
Pointing Device	Integrated Touchpad
Backlit	No
Number of Keys	87
Protection	IP65
Compatibility	Windows, Android, iOS
Material	Polycarbonate
Key Type	Full travel
Key Switch Type	Membrane