Installation Options
There are several ways to use your iKeyp Bolt. The two most popular are 1) to mount it
directly to a wall using the included hardware or 2) to simply use it freestanding on a
dresser, counter or tabletop.
MOUNTING DIRECTLY TO A WALL
1) Read the included instructions titled “Mounting Instructions” carefully to
determine the best mounting option.
2) Use the “Mounting Template” to mark the installation location.
3) Refer to the “Wall Anchor Installations” to complete the installation.
TOGGLE TAMPER DETECTION MODE
With the main door open, Press the “0” key for 5 seconds until the iKeyp beeps.
Tamper Detection Mode will toggle between “Off” (factory default) and “On” with each
use of this sequence.
7
IMPORTANT: To arm the iKeyp Bolt with Tamper Detection, please follow the
instructions below to toggle the feature between “On” and “Off”.
For further information and online video tutorials on how to install and uninstall
the iKeyp Bolt, please visit iKeyp.com/support
NEED ASSISTANCE?
If you have any questions, please visit iKeyp.com/support
or call Customer Support at +1 (800) 485-8904.
?
To Previous Page