IKONIX SCI 295 User Manual

hipot.com 61
Then the display will show a value similar to that of the standard.
Turn and press the rotary knob to enter the reading of the standard AC Ammeter into the tester. Once all digits are entered
the tester will advance to the next calibration point.
Then press the Test button on the front panel. The tester will begin outputting high voltage on the output connectors.
Then the display will show a value similar to that of the standard.
Turn and press the rotary knob to enter the reading of the standard AC Ammeter into the tester. Once all digits are entered
the tester will advance to the next calibration point.
Then press the Test button on the front panel. The tester will begin outputting high voltage on the output connectors.
Then the display will show a value similar to that of the standard.
Turn and press the rotary knob to enter the reading of the standard AC Ammeter into the tester. Once all digits are entered
the tester will advance to the next calibration point.
Then press the Test button on the front panel. The tester will begin outputting high voltage on the output connectors.
Then press the Test button on the front panel. The tester will begin outputting high voltage on the output connectors.

IKONIX SCI 295 Specifications

General

Brand	IKONIX
Model	SCI 295
Category	Test Equipment
Language	English