ATTENTION: Any maintenance works that are not explicitly described in these Operating Instructions must be
carried out by an authorized workshop.
7 Maintenance
POLE HEDGE TRIMMER
Please note that the following maintenance intervals apply for normal
operating conditions. If your daily working time is longer than normal or
working conditions are difcult (very dusty work area, etc.), shorten the
specied intervals accordingly.
before starting
work
after nishing work
or daily
after eachrefueling
stop
yearly
if problem
if damaged
as required
Cutting blades visual inspection x x
Sharpen x
Gearbox lubrication Check x
Top up x
GB-37
To Next Page
