GB-15
Troubleshooting
Problem Possible Cause Possible Solution
Unit does not run Power cord not connected Check power supply connection
Lock o not fully operated Check that lock o is fully forward
prior to moving trigger
Blade cutter is running hot Blade cutter dull Have blade sharpened
Blade cutter has dent Have blade inspected/ overhauled
Too much friction, due to lack of
lubricant
Apply lubricant spray
Blade cutter will not move Machine defective Contact Service Agent
Excessive vibrations/noise Machine defective Contact Service Agent
Pole trimmer operates intermittently Internal wiring of machine damaged Contact Service Agent
On/O switch defective Contact Service Agent
EC Declaration of Conformity
We, Ikra GmbH, Schlesier Straße 36, D-64839 Münster, declare under our sole responsibility that the product
Electric Telescopic Hedge Trimmer ITHS 600, to which this declaration relates correspond to the relevant basic
safety and health requirements of Directives 2006/42/EC (Machinery Directive), 2014/30/EU (EMV-Guideline),
2011/65/EU (RoHS-Guideline) and 2000/14/EC+2005/88/EC (noise directive) incl. modications. For the relevant
implementation of the safety and health requirements mentioned in the Directives, the following standards and/or
technical specication(s) have been respected:
EN 60745-1:2009+A11:10; EN 60745-2-15:2009+A1:10 (teilweise / in parts); EN ISO 10517:2009+A1:13
EN 50581:2012; PAK-Anforderung (PAH requirement) AfPS GS 2014:01 PAK
EN 55014-1:2006/+A1:2009/+A2:2011; EN 55014-2:1997/+A1:2001+A2:2008
EN 61000-3-2:2014; EN 61000-3-3:2013
measured acoustic capacity level 101,9 dB (A); K 3,0 dB(A)
guaranteed acoustic capacity level 104 dB (A)
Conformity assessment method to annexe V / Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number.
Münster, 10.01.2019
Matthias Fiedler
, Senior Product Manager Ikra GmbH
Maintenance of technical documentation: Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany