EasyManua.ls Logo

IKUSI T70/2 - User Manual

IKUSI T70/2
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Rhein Tech Laboratories, Inc.
Client:
IKUSI – Angel Iglesias
360 Herndon Parkway
Model:
TR800CE-EMB
Suite 1400
Standards:
FCC 90/IC RSS-119
Herndon, VA 20170
http://www.rheintech.com
FCC ID:
PVTTR800CE-EMB
Report #:
2011148
Page 33 of 41
Appendix M: Manual
Please see the following pages.
Question and Answer IconNeed help?

Do you have a question about the IKUSI T70/2 and is the answer not in the manual?

Summary

Declaration of Conformity 870 MHz ISM Band

Declaration of Conformity 433 MHz ISM Band

Safety Instructions

What You Must Do

Adherence to installation instructions and safety regulations is required.

What You Must Not Do

Prohibitions regarding modifications, power supply, and operation of the equipment.

FCC Recommendations

Guidelines for FCC compliance, RF exposure, and potential interference.

Installation

CB70;BC70 K Battery Charger Installation

Details on connecting and using the battery charger for TM70 series.

Receiver Installation

Procedure for locating and installing the receiver unit.

Starting Up Procedure

Steps to power on and verify the receiver and transmitter during initial setup.

Using the Set

Maintenance

Warranty Information

Details on the TM70 remote control set warranty period and exclusions.

Troubleshooting

Guidance on identifying and resolving common issues using LED indicators.

Annex A Programming a Spare Transmitter

Frequency Change

Base Channel Frequency Change Procedure

Procedure for changing the base channel frequency of the TM70 system.

First Come - First Served Operation

LA70 & LA70 M Range Limiter Option

LA70 Infrared Transmitter Installation

Procedure for installing the infrared transmitter and connecting its power supply.

LA70 M Infrared Transmitter Installation & Connections

Installation and connection procedures for the LA70M transmitter with Master/Slave configuration.

Pitch & Catch Operation

Tandem Operation

Analogue Feedback and 0-10 V Calibration

Analogue Feedback Calibration with LCD

Step-by-step guide to calibrate analogue input using the LCD display.

T70;1 & T70;2 ATEX Transmitters

ATEX Transmitter Main Characteristics

Technical specifications for T70/1 and T70/2 ATEX transmitters.

R70;XX Receivers SW 3.2 Compatibility

Binary Rotary Switch Option

Binary Switch Operating Mode (DLA Option)

Operating modes for T70/1 and T70/2 transmitters with DLA option using binary switches.

IKUSI T70/2 Specifications

General IconGeneral
BrandIKUSI
ModelT70/2
CategoryTransmitter
LanguageEnglish

Related product manuals