Charging the Unit
Charge Status
1. Using a Micro-USB to USB cable (included),
connect the larger USB plug to the USB
port of a powered on computer or USB
power adaptor.
2. Connect the smaller Micro-USB plug
into the Micro-USB port of the charger.
The unit will now charge, and will turn o
automatically when disconnected.
Note: Charge fully before use. Initial charge time is
approximately 6 hrs. Charge the unit at least once
a month to maintain battery integrity, even when
not in use.
4 Bars : 100%
3 Bars : 75%
2 Bars : 50%
1 Bar : 25%
0 Bars : No Charge
To Next Page
Loading...