Charging Devices
1. Power on the unit and be sure it has
sucient battery power.
2. Using a Micro-USB to USB cable
(included), connect the larger USB plug to
the USB Output on the unit.
3. Connect the smaller Micro-USB plug into
the Micro-USB port of the device you wish
to charge.
4. Press the Power button. The charger will
begin charging your mobile device.
The unit will automatically power o after
a period of inactivity.
Note: The output on this charge is 5V 1A. Refer
to the user’s manual for your specic device for
manufacturers required charging amperage as
well as determining the appropriate cable for
your device before charging.
To Previous Page
Loading...
