8
Bluetooth Setup
Pairing a Bluetooth Device
for the First Time
1. Power on the unit by pressing
the Power button.
2. Press and hold the Pair button until
the Pairing Indicator ashes blue.
When pairing, remain within
3 feet of the unit.
3. Using the native controls on your
Bluetooth device, select the “ISB311B”
in your Bluetooth settings to pair.
If your device requests a password,
enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your
specic device for instructions on pairing
and connecting Bluetooth devices.
4. When successfully paired and
connected, the Pairing Indicator
will display a solid blue light and
a beep will sound from the unit.
After initial pairing, the unit
will stay paired unless unpaired
manually by the user or erased
due to a reset of the device.
Re-Pairing or Pairing New Devices
1. Power on the unit by pressing
the Power button.
2. The Pairing Indicator will
ash blue quickly.
When pairing, remain within
3 feet of the unit.
3. Using the native controls on your
Bluetooth device, select the “ISB311B”
in your Bluetooth settings to pair.
If your device requests a password,
enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your
specic device for instructions on pairing
and connecting Bluetooth devices.
4. When successfully paired and
connected, the Pairing Indicator
will display a solid blue light and
a beep will sound from the unit.
After initial pairing, the unit
will stay paired unless unpaired
manually by the user or erased
due to a reset of the device.
If your device should become
unpaired, follow the directions in
Re-Pairing or Pairing New Devices.
To Next Page
Loading...
