PAIRING A BLUETOOTH DEVICE
1. Slide the Power Switch to ON.
2. Press and hold the Pair button to begin pairing.
The Pairing Indicator will begin ashing quickly. When pairing, remain within 3 feet
of the unit.
3. Using the controls on your Bluetooth device, scan for and select ISB35 in your
Bluetooth settings to pair. If your device requests a password, enter the default
password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing and
connecting Bluetooth devices.
4. When successfully paired, the Pairing Indicator will turn solid and an audible
chime will sound through the speaker.
After initial pairing, the unit will stay paired unless unpaired manually by the user or
erased due to a reset of the device. If your device should become unpaired or you nd
it is unable to connect, repeat the above steps.
To Next Page
Loading...
