10
Operations
When connecting two products using
an RCA Cable, match the colored ports
with the same colored connection.
1. Connect the RCA Cable to the
Stereo RCA Inputs located on the
back of the unit, and to the audio
outputs on the television.
2. Press the Power button to
power on the unit.
3. Press the Source button and
select the input used.
Either AUX 1 or AUX 2.
4. Audio played through the
television will now be heard
through the speakers.
Additional devices such as a DVD
player or game system may also be
connected to the second set of audio
inputs using the steps above.
1. Plug one end of a 3.5 mm audio
input cable into the 3.5 mm
Audio Input on the unit.
3.5 mm audio input cable not included.
2. Plug the other end of the cable into the
audio output/headphone output on
an MP3 Player or other audio source.
3. Press the Power button to
power the unit on.
4. Press the Source button repeatedly
to switch the unit to LINE IN.
5. Audio played through the
connected device will now be
heard through the speakers.
3.5mm Audio Input
Using the Stereo RCA Inputs
To Next Page
Loading...
