iLive ITP100B - Clock and Alarm Functions; Setting the Clock; Setting the Alarm

CUSTOMER HELPLINE | 1-314-621-2881 iLive | ITP100B 9
CLOCK
Setting the ClockSetting the Sleep Timer
Setting the Alarm
1 Press the POWER button to turn the
bar speaker o.
2 Press and hold the SOURCE/CLOCK
ADJUST button for 3 seconds.
The time on the display will begin
blinking.
3 Press the VOLUME/CLOCK (+/-)
buttons to adjust the hour.
4 Press the SOURCE/CLOCK ADJUST
button.
5 Press the VOLUME/CLOCK (+/-)
buttons to adjust the minute.
6 Press the SOURCE/CLOCK ADJUST
button to nish setting the time.
1 Press the POWER button to turn the
bar speaker on.
2 Press the CLOCK/SLEEP button on
the remote repeatedly to set the
sleep timer.
3 After the set amount of time
has expired, the bar speaker will
automatically power o.
1 Press the POWER button to turn the
bar speaker o.
2 Press and hold the ALARM button,
on the remote, for 3 seconds.
The alarm time on the display will
begin blinking.
3 Press the TUN/REW/FWD buttons on
the remote to adjust the hour.
4 Press the ALARM button.
5 Press the TUN/REW/FWD buttons to
adjust the minute.
6 Press the ALARM button.
7 Press the TUN/REW/FWD buttons
to switch between wake to iPod or
wake to FM radio, as indicated on the
display.
8 Press the ALARM button to nish
setting the alarm.