What to do if my iLiving Fan has insufficient air flow?
If your iLiving Fan isn't providing enough airflow, start by checking for any obstructions blocking the intake or exhaust openings. Clear away any debris and clean the motor, guard, propeller, and shutter assembly. Also, make sure that the speed control isn't set too low; increase it using the controller. Finally, examine the electrical wiring to ensure that low voltage isn't the cause.
What to do if my iLiving Fan is inoperative?
If your iLiving Fan is not working, first check the fuse or circuit breaker and replace or reset it if necessary. If that doesn't solve the issue, the motor may be defective and require replacement. Also, make sure the switch is in the ON position.
Why is my iLiving Fan making excessive noise?
If your iLiving Fan is making excessive noise, it could be due to several reasons. First, the motor bearings might be dry, requiring re-lubrication or motor replacement. Second, check if the propeller is loose and tighten the set screws on the propeller hub. Third, inspect the propeller for any bending or damage and replace it if needed. Finally, ensure that the guard assembly or motor fasteners are tightened to 15-20 lbs per inch.
General| Power Source | Corded Electric |
|---|---|
| Number of Speed Settings | 3 |
| Oscillation | Yes |
| Remote Control | Yes |
| Blade Size | 16 inches |
| Number of Blades | 3 |
| Material | Metal |
| Color | Black |
| Voltage | 120V |
| Wattage | 55W |
Identifies the document as an owner's manual for the product.
Lists the specific model numbers covered by this manual.
Covers electrical needs, required tools, and inspection procedures.
Emphasizes the importance of reading and following safety instructions.
Visual guides for electrical connections during installation.
Shows installation diagrams tailored to different model series.
Instructions for wiring the junction box and securing the power cord.
Provides specific measurements for fan components and installation.
Presents CFM air delivery at various static pressures.
Describes the functions of the knobs, switches, and displays on the controller.
Instructions on how to set and change the fan speed.
Guides on adjusting the thermostat and using the bypass mode.
Outlines maintenance tasks and critical safety procedures like lock-out/tag-out.
Lists symptoms, causes, and solutions for fan malfunctions.
Instructions for registering the product and providing feedback.
Company contact information and official website.
To Next Page
