13
One or all cooking zone cut-off :
x The safety system functioned.
x You forgot to cut-off the cooking zone for a long time.
x One or more sensitive keys are covered.
x The pan is empty and its bottom overheated.
x The hob also has an automatic reduction of power level and breaking Automatic overheating
Continuous ventilation after cutting off the hob :
x This is not a failure, the fan continuous to protect the electronic device.
x The fan cooling stops automatically.
The control panel displays [ L ] :
Refer to the chapter control panel locking page.
The control panel displays [ ] or [ Er03 ] :
x An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ E2 ] :
x The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E3 ] ou [ E7 ] :
x The pan is not adapted, change the pan.
The control panel displays [ E6 ] :
x Defective network. Control the frequency and voltage of the electrical network.
The control panel displays [ E8 ] :
x The air inlet of the ventilator is obstructed, release it.
The control panel displays [ E C ] :
x Configuration error. Set the table again, referring to the chapter "The [E 4] appears."
If one of the symbols above persists, call the SAV.
ENVIRONMENT PRESERVATION
x The packing materials are ecological and recyclable.
x The electronic appliances are composed of recyclable, and sometimes harmful materials
for the environment, but are necessary for the good running and the safety of the
appliance.
To Next Page
Loading...
