ILVE IVDFI400 User Manual (English)

Questions and Answers:

M
Monica BarkerAug 18, 2025
Why won't my ILVE Dishwasher start?
- L
  Larry JohnsonAug 18, 2025
  There are several reasons why your ILVE Dishwasher might not start: * It is not plugged in. If this is the case, plug your dishwasher in. * It is not switched on. If this is the case, switch your dishwasher on by pressing the On/Off button. * A fuse has blown. If this is the case, check your indoor fuses. * The water inlet tap is closed. If this is the case, turn on the water inlet tap. * The dishwasher door is open. If this is the case, close the dishwasher door. * The water inlet hose and machine filters are clogged. If this is the case, check the water inlet hose and machine filters and make sure they are not clogged.
J
jasonbakerAug 21, 2025
What to do if water remains inside my ILVE IVDFI400 Dishwasher?
- J
  jonessummerAug 21, 2025
  If water remains inside your ILVE Dishwasher, it could be due to several reasons: * The water drain hose is clogged or twisted. Check the drain hose, and either clean or untwist it. * The filters are clogged. Clean the filters. * The programme is not finished yet. Wait until the programme is finished.
A
Alexis DavidAug 23, 2025
What to do if my ILVE IVDFI400 leaves partial food wastes on the dishes?
- G
  Gina DavisAug 23, 2025
  If you find partial food wastes remain on the dishes in your ILVE Dishwasher, consider the following: * Do not overload the baskets, as incorrectly placed dishes may not be reached by the sprayed water. * Ensure dishes are not leaning against each other; place them as instructed in the loading section. * Use the correct amount of detergent, as indicated in the programme table. * Select the most appropriate programme using the information in the programme table. * Clean the holes in the spray arms with thin objects if they are clogged with food waste. * Check that the drain hose and filters are correctly fitted and not clogged.
C
Cassandra SchmittAug 26, 2025
How to fix rust stains on dishes from my ILVE IVDFI400 Dishwasher?
- S
  Sarah HarrellAug 26, 2025
  If rust stains form on the dishes in your ILVE Dishwasher, it could be due to: * Insufficient stainless-steel quality of the dishes. Use only dishwasher-proof sets. * A poor mains grounding. Consult a qualified electrician immediately.
F
fjonesAug 27, 2025
Why is my ILVE IVDFI400 shaking and making hitting noises?
- C
  Cameron AdamsAug 28, 2025
  If you hear shaking and hitting noises during a wash operation in your ILVE Dishwasher, the spray arm may be hitting the dishes in the lower basket. Move or remove items blocking the spray arm.
M
Marissa SchneiderAug 30, 2025
Why does my ILVE Dishwasher stop during washing?
- U
  umilesAug 30, 2025
  Your ILVE Dishwasher might stop during washing due to: * A power failure. Check mains power. * A water inlet failure. Check the water tap.
C
Cassandra KeySep 1, 2025
What to do if dishes do not dry in my ILVE IVDFI400?
- K
  Kimberly BurtonSep 1, 2025
  If the dishes do not dry in your ILVE Dishwasher, it could be because: * The drying option is not selected. Select a programme with a drying option. * The rinse aid dosage is set too low. Increase the rinse aid dosage setting.
H
herringtaraSep 4, 2025
Why does detergent remain in the compartment of my ILVE IVDFI400 Dishwasher?
- J
  Jason RollinsSep 4, 2025
  If detergent remains in the detergent compartment of your ILVE Dishwasher, it may be because detergent was added when the compartment was wet. Make sure the detergent compartment is dry before use.
N
Nathan PattersonSep 6, 2025
Why does my ILVE IVDFI400 Dishwasher have whitish stains on dishes?
- R
  Reginald MartinSep 6, 2025
  If whitish stains remain on dishes washed in your ILVE Dishwasher, it could be due to: * Not enough detergent used. Use the correct amount of detergent, as instructed in the programme table. * Rinse aid dosage and/or water softener setting set too low. Increase rinse aid and/or water softener level.
L
Lisa GarciaSep 8, 2025
How to fix insufficient water input in ILVE Dishwasher?
- S
  smithmarySep 8, 2025
  To address insufficient water input in your ILVE Dishwasher: * Make sure the water inlet tap is open and water is flowing. * Separate the inlet hose from the tap and clean the filter of the hose. * If the error continues, contact for service.