9
OPERATION / USER
IMPORTANT SAFETY
WARNINGS
• Before powering the appliance, check that the technical features shown on the
data plate match those of the electrical system.
• Installation / adjustment must be carried out by qualied personnel.
• Make sure that air around the appliance can circulate freely.
• This appliance is not connected to an evacuation device for combustion
products, therefore ventilation of the room must be considered carefully and
meet local regulations.
• When using a gas appliance, heat and moisture are generated. Good ventilation
of the kitchen must be guaranteed by keeping the natural aeration vents open or
by installing a mechanical aeration device (range-hood). An intensive and
prolonged use of the appliance may result in the need for supplementary
ventilation such as opening a window or increasing the power of the hood (if
present).
• Do not block ventilation or heat dissipation openings.
• The supply cable (if tted) is supplied without a plug. To connect It, please refer
to the paragraph “electric connection” in the installation guide. It is
recommended to not use adapters, multiple-outlet plugs or extensions. If the
supply cable is damaged it must be replaced by an authorised service person.
• When the appliance is not in use for a prolonged time, switch off the electrical
supply and turn off the gas.
• The appliance must be used only for the purposes for which it was intended i.e.
cooking food in a domestic or similar to domestic environment. Any other use
(for example, heating a room) is incorrect and may be dangerous. The
manufacturer declines all responsibilities for damage caused by incorrect uses.
• The appliance is not destined to be activated by means of an external timer or a
remote control.
To Next Page
Loading...
Need help?
General
