Need help?Do you have a question about the Image 572 Home Trainer and is the answer not in the manual?
Emphasizes reading the entire manual and accompanying literature before operating the equipment.
Advise users to inspect and tighten all parts each time the equipment is used.
Warns users to keep hands away from moving parts, except for designated handles.
Stresses the importance of keeping small children away from the equipment at all times.
Instructs users to ensure seat lock knobs are fully inserted into holes for safety.
Warns against releasing arms or levers with raised weights due to fall risk.
Advises users to ensure that cables remain on the pulleys during exercise.
Recommends stopping exercise immediately if pain or dizziness is experienced.
Connects the base frame to the long stabilizer with pulley brackets and pulleys.
Attaches the "U" upright to the stabilizer and installs backrest pads.
Secures the weight stack bottom and attaches a pulley to its bracket.
Mounts the upright to the base frame and installs pulleys on the upright.
Attaches the top frame and installs pulleys using spacers.
Connects handlebars and pads to the press seat adjuster assembly.
Attaches pads to the backrest adjustment plate and slides seat adjuster.
Slides roller pad adj into base frame and attaches leg lever with hardware.
Mounts pec dec support, arms, and pads to the "U" upright.
Attaches the pec dec seat support and slides in the adjustment assembly.
Assembles squart frame, supports, and installs hand grips.
Connects pivot bracket to squart frame and attaches squart adjustment pulley.
Assembles press arm, adjuster motion, and installs pulleys for the mechanism.
Attaches weight guide tops to the top frame and installs pulleys.
Inserts weight guides, weight stacks, and top plate into the frame.
Secures weight stack guards to the weight guide tops and base frame.
To Next Page
General