ASSEMBLY- STEP 9
• SIZE 4 ALLEN
• IDENTIFY THE H1 AND H2
DRAWINGS ON THE SIDE OF EXT.
2
• H1 POSITION IS TOP OF BRACKET
FOR THE TALL TRAYS, H2
POSITION IS FOR SHORT TRAYS
• REMOVE SOCKET HEAD SCREWS FROM
T-NUT AND DROP THE T-NUTS IN
• POSITION THE VALVE MOUNTING
BRACKET AS INDICATED BY THE DESIRED
HEIGHTS DRAWING
• TIGHTEN DOWN SOCKET HEAD
SCREWS THROUGH THE BRACKET BACK
INTO THE T-NUTS
M6x10mm
To Next Page
Loading...