Need help?Do you have a question about the IME Nemo D4-e and is the answer not in the manual?
Sets the Level 1 password for basic programming access.
Configures which measurement magnitudes are displayed on the device.
Selects the instrument's line connection type (e.g., single-phase, three-phase).
Sets the integration time for average power and current measurements.
Determines the condition (voltage or power) that initiates hour-meter counting.
Configures communication settings for ModBus RTU/TCP protocols.
Sets up energy pulse association, weight, and duration.
Sets the Level 2 password for advanced configuration and diagnostics.
Configures the ratio for external Current Transformers (CTs).
General| Brand | IME |
|---|---|
| Model | Nemo D4-e |
| Category | Multimeter |
| Language | English |
To Next Page
