IME Nemo D4-e - Display

Nemo D4-e
07/17 10783591 WEB E cod.MFD4E06
11
Display
The display is divided into four menus which can be accessed with the function keys:
The display magnitudes and modes vary as a function of the connection selected (three-phase 3 or 4-wire line, single-phase, etc.)
All the measurements displayed are indicated in the following pages as a function of the connection selected.
*See Configuration Data display, page 15
Phase voltage Phase current Active power Active energy
Interlinked voltage Average current Reactive power Reactive energy
Minimum voltage value
Average current peak Apparent power Power factor
Maximum voltage value Neutral current Distortion power Frequency
Voltage harmonic distortion Sum of the 3 currents Average power Hour meter
Current harmonic distortion Average power peak Configuration data*
U
I
P Q S
E PF F
..
..
OK
U
I
P Q S
E PF F
..
..
OK
U
I
P Q S
E PF F
..
..
OK
U
I
P Q S
E PF F
..
..
OK