To Next PageTo Next Page
Need help?Do you have a question about the Imesa ES23 and is the answer not in the manual?
Details on connecting the dryer to the electrical supply via a terminal board and switch.
Instructions for connecting steam-heated dryers to an external boiler, including traps and filters.
Guidelines for connecting gas dryers, including pressure, pipes, and interception cocks. Includes tightness test info.
Requirements for the dryer's exhaust ducting to ensure proper ventilation and safety.
Explains how dryer operation depends on gas type and pressure, requiring installer checks.
Essential checks and tests after connecting the machine to ensure correct installation.
Recommendations for instructing users on operation, safety, and maintenance contracts.
Indicates insufficient depression during heating phase; requires checks on fan rotation and pressostat.
Alarm triggered by an open door; requires closing the door or checking the microswitch.
Signifies a broken temperature probe; requires checking probe connection and function.
Indicates motor thermal overload; requires checking motor terminals and power supply.
Occurs on gas machines if the ignitor fails; requires checking ignition system and sensors.
Indicates abrupt decrease in gas pressure; requires checking gas supply pressure.
Recommended checks every six months, including hinges, screws, electrical ground, and belts.
Annual operational inspection recommended to ensure full machine functionality and safety.
General