To Next PageTo Next Page
Need help?Do you have a question about the Imesa ES34 and is the answer not in the manual?
Details on connecting the dryer to the power supply, including terminal board and safety switch requirements.
Instructions for connecting steam-heated dryers to an external boiler, including necessary components.
Guidelines for connecting gas dryers, pressure requirements, fast interception cock, and tightness testing.
Requirements for the dryer exhaust duct, including length, slope, and condensate trap installation.
Adjusting the dryer to the gas type and understanding factors affecting thermal power operation.
Steps for initial operation and testing after installation, including checks and inspections.
Information for the user on machine operation, maintenance, servicing, and keeping the manual.
Indicates insufficient depression. Checks fan rotation, pressostat connection, and functionality.
Signifies the door is open. Close door to reset. Check microswitch and connections if persistent.
Indicates a broken temperature probe. Check probe connection and its functioning.
Occurs due to motor thermal overload. Check motor terminals and power supply voltage.
Gas machines: igniter failure. Check ignition system, plug, and ionisation sensor.
Gas machines: abrupt gas pressure decrease. Check gas feeding pressure.
Inspect hinges, screws, bearings, connections, motor, belts, and safety devices.
Perform a complete operational inspection of the machine at least once a year.
General