IMET Spa VELOX 350 AF-E User Manual

28/11/02-\\SERVER\TECNICO\-SNZ\0Sit\hVelox350afe.doc-Scheda Identificazione Codice Padre (mac.sott.etc...)-1
di 76 pagine.
Pagina n°-
1
VELOXAFE.DOC
63A VERSION O
MI/O/03-97/0
---------------------------------------------------------------------------------------------------------------------------------------
INSTRUCTION MANUAL, MAINTENANCE AND SPARE-PARTS
(read carefully all information contained in this manual)
---------------------------------------------------------------------------------------------------------------------------------------
CIRCULAR CUT OFF SAWING MACHINE, RECOMMENDED FOR CUTTING ALUMINIUMN
MODEL : VELOX
VERSION : 350 AF-E (automatic-electronic)
(summery of all information foreseen for the marking: see page 3)
---------------------------------------------------------------------------------------------------------------------------------------
IMET S.p.A
Località Tre Fontane - 24034 CISANO BERGAMASCO (BG)
Tel. 035 / 787833, Fax. 035 / 787066
---------------------------------------------------------------------------------------------------------------------------------------

IMET Spa VELOX 350 AF-E Specifications

General

Category	Saw
Model	VELOX 350 AF-E
Manufacturer	IMET Spa
Blade Diameter	350 mm
Cutting Depth at 90°	120 mm
Cutting Depth at 45°	85 mm
Motor Power	2.2 kW
Voltage	400 V
Frequency	50 Hz

Summary

MACHINE DESCRIPTION, E.C. SAFETY NORMS, SUGGESTIONS FOR THE USE

INSTRUCTIONS FOR USE - SUGGESTIONS FOR THE OWNER AND THE OPERATOR

SAFETY SIGNS

INSTALLATION

DIFFERENTIAL PROTECTION for models equipped with electronic variable-speed drive unit (ESC)

FITTINGS ASSEMBLING

BLADE CHOICE

MACHINE SETTING FOR STARTING

COOLING SYSTEM and BLADE ASSEMBLING SIRIO 370 AF-E

COOLING SYSTEM and BLADE ASSEMBLING VELOX 350 AF-E

PNEUMATIC CONNECTION

How to connect the pneumatic system.

ELECTRICAL CONNECTION

How to connect the electrical system.

SYSTEM STARTING

KEYBOARD / Description and use of the buttons

Description and usage of control panel buttons.

SETTING OF THE CUTTING LIMITS

Procedure for setting cutting limits.

INFORMATION ON DISPLAY / 2 = Errors table (SELF-DIAGNOSTICS)

DESCRIPTION OF THE COMMANDS

Detailed description of all machine controls.

PREPARATION FOR THE SEMIAUTOMATIC CYCLE

SEMIAUTOMATIC CYCLE

How to perform a semiautomatic cutting cycle.

LOCKING / EMERGENCY LOCKING

Stopping the cycle and emergency procedures.

PREPARATION TO THE AUTOMATIC CYCLE

Steps to prepare for automatic cycle.

AUTOMATIC CYCLE

How to perform an automatic cutting cycle.

OVERLOAD PROTECTIONS

ADJUSTMENTS FOR SIRIO 370 AF-E, VELOX 350 AF-E

Air pressure for the cutting unit

Air pressure for the vices

Cutting speed

CUTTING UNIT ADJUSTMENTS FOR VELOX

VICES

HEAD

CUTS

MAINTENANCE - FOR THE USER

PERIODICAL INTERVENTATIONS

Routine maintenance tasks.

BLADE RUNNING-IN

MACHINE RUNNING-IN

IDENTIFICATION OF FAULTS

MACHINE OPERATION FAULTS

Common faults and tests for machine operation.

SAW BLADE FAULTS / CAUSES / SOLUTIONS

Solutions for saw blade issues.

MAINTENANCE - for qualified technicians

FAST INSTRUCTION FOR USE OUR AUTOMATIC MACHINE SIRIO/VELOX AF-E