9
Clean the appliance with a damp cloth when necessary. Never use solvents or other harsh abrasives or
cleaners. These substances may damage the surfaces.
Switch the motor ON, and run your hand through the bristles to remove any dust or wool which will be suctioned
into the bag.
The paper dust bag (12B) should be replaced as soon as the full bag indicator (10) turns red. Perform this
operation immediately: to avoid drops in power, or the possible breaking of the dust bag due to overfilling.
• Press the dust bag container open button (11) and remove the lid (12) (Fig. E1).
• Push the slide (12A) towards the dust bag (12B) (Fig. E2).
• Pull out the dust bag (12B) and replace it with a new one.
• Insert the opening of the paper bag as far as possible into the guides and release the slide (12A).
• Open the dust bag container lid (12).
• Pull out the filter and replace it with a new one, fitting it in the guides (Fig. E3).
• Close the dust bag lid (12) again inserting the lower part into the guide and pressing the top section until it
clicks which means it is positioned correctly and the dust bag open button is locked (11).
• Press the vacuum air grid interlock (5) and remove it (Fig. E4).
• Lift the vacuum air filter out (4) and replace the filter insert with a new one.
• Reinsert the vacuum air grid (5) which should click into the interlock position.
•
To Next Page
Loading...
