Person
responsible for
the product
The person responsible for the product has the following duties:
To understand the safety instructions on the product and the
instructions in the user manual.
To ensure that it is used in accordance with the instructions.
To be familiar with local regulations relating to safety and
accident prevention.
To inform Imex immediately if the product and the
application becomes unsafe.
To ensure that the national laws, regulations and conditions
for the operation of.
Power
Mode Select
Calibrate
Sound/Backlight
Hold
Laser on/off
Press to turn the EL30 on/off
Select to display ° ,% , mm/m , inch/ft
Long Press to enter calibrate mode
Short press to turn sound on/off
Long press to turn backlight on/off
Press to freeze the display
Press to laser beam on/off
Screen Hold Laser On/Off Calibrate
Sound/Backlight Power Mode
To Next Page
Loading...
