IMG STAGE LINE MMX-1202 - User Manual

12-KANAL-AUDIOMISCHPULT
12-CHANNEL AUDIO MIXER
TABLE DE MIXAGE AUDIO 12 CANAUX
MIXER AUDIO A 12 CANALI
MMX-1202 Best.-Nr. 20.2110
BEDIENUNGSANLEITUNG • INSTRUCTION MANUAL • MODE D’EMPLOI
ISTRUZIONI PER L’USO • GEBRUIKSAANWIJZING • MANUAL DE INSTRUCCIONES • INSTRUKCJA OBSŁUGI
SIKKERHEDSOPLYSNINGER • SÄKERHETSFÖRESKRIFTER • TURVALLISUUDESTA

Summary

1 Overview of Operating Elements and Connections

1.1 Connection panel on the front side (fig. 1)

Details the input/output jacks and controls on the mixer's front panel.

1.2 Input channels (figs. 3 and 4)

Explains gain, EQ, AUX, PAN/BAL, MUTE, PFL/SOLO controls for input channels.

1.3 Output panel (fig. 5)

Describes controls for AUX SEND, CTRL ROOM, PHONES, MAIN MIX, GROUP, 2-TRACK.

1.4 Rear panel (fig. 6)

Details the power switch, power supply jack, and various output connections.

2 Safety Notes

3 Applications

4 Modification of the Send Way AUX 1 and the AUX RETURN Monitor Function

4.1 Changing AUX 1 from Pre-Fader to Post-Fader

Instructions on how to switch the AUX 1 send path from pre-fader to post-fader.

4.2 Changing the Monitor Function from AUX RETURN 1 to AUX RETURN 2

Guide on altering the monitor source for AUX RETURN from 1 to 2.

5 Connecting the Units

5.1 Microphones

How to connect microphones, including phantom power considerations.

5.2 Units with Line Output Level

Instructions for connecting stereo units with line output.

5.3 Inserting Units for Sound Processing

Connecting external units like compressors via the insert jacks.

5.4 Effect Units

How to connect and use external effect processors via AUX send/return.

5.5 Headphones and Control Room Monitor System

Connecting headphones and monitor speakers for listening.

5.6 Recorder

Connecting a recorder for mixing and playback.

5.7 Power Amplifier for PA Applications

Connecting a power amplifier for sound reinforcement.

5.8 Signals of the Subgroups

How to route subgroup signals to other equipment.

5.9 Power Supply

Connecting the mixer to the power adapter and mains.

6 Operation

6.1 Basic Setting of the Input Channels

Initial setup steps for input channels, including gain and EQ.

6.2 Mixing the Audio Sources

How to balance and blend different audio signals.

6.3 Adding the Input Signals to the Subgroups

Routing input signals to subgroups for level control.

6.4 Adjustments for the Send Ways

Configuring AUX send paths for monitor or effect use.

6.5 Monitoring the Channels

Using PFL/SOLO and monitor outputs to listen to signals.

7 Specifications

8 Glossary

IMG STAGE LINE MMX-1202 Specifications