IMG STAGE LINE MMX-206

Need help?

Do you have a question about the IMG STAGE LINE MMX-206 and is the answer not in the manual?

Summary

Applications

Important Safety Notes

Operating Elements and Connections

Mono channels 1-14

Details controls and connections for the 14 mono input channels, including gain, EQ, and routing.

Stereo channels M1 and M2

Stereo Channel Controls

Details controls for stereo channels M1 and M2, including MIC/LINE inputs, EQ, routing, and faders.

Output section

Output Jacks

Details subgroup and AUX send output jacks, including normal and stage modes.

Auxiliary Inputs

Details the stereo auxiliary inputs AUX INPUT 1-4.

Level Display and Indicators

Explains the VU meter and POWER LED functions.

AUX Input Controls and Routing

EQ, level, and routing controls for AUX INPUT 1 and 2.

Channel and Subgroup Monitoring Controls

Stage Mode Activation and Controls

Controls for activating Stage Mode and its effects on routing and faders.

Master and Insert Connections

Master output, insert, and auxiliary send jacks and controls.

Phantom Power and Monitoring Volume Controls

Phantom power switch, headphone/control room volume, and monitoring controls.

Rear side

Power Supply Input and Output Jacks

Power supply input and balanced/mono output jacks on the rear panel.

TR-LINK Input

TR-LINK input jack for an extension module.

Power supply unit

Power Supply Unit Components

Details of the power supply unit's cable, fuse holder, jack, and switch.

Modifications of the channels including control facilities

Internal Channel Modifications

Instructions and warnings for opening the unit and performing internal channel modifications.

Switching off the phantom power for individual mono channels

Switching on the phantom power for individual stereo channels

Changing the signal take-off points of the AUX send ways A3 to A6

Signal Take-off Point Adjustment for A3;A4

How to change signal take-off point for AUX send ways A3 and A4.

Signal Take-off Point Adjustment for A5;A6

How to change signal take-off point for AUX send ways A5 and A6.

Connection of the Units

Power supply unit

Connecting the power supply unit to the mixer.

Amplifier Connections

Connecting amplifiers to PA system, stage, or monitor systems.

Headphones Connection

Connecting headphones for monitoring signals.

Microphones

Connecting Microphones

Connecting microphones, including phantom power usage and warnings.

Musical instruments and units with line output

Effect units

Inserting Effect Units

Methods for inserting effect units into channels, subgroups, or master output.

Connecting Effect Units in Parallel

Steps for connecting effect units in parallel via AUX sends.

Recording Units Connection

Connecting multi-track recorders to DIRECT OUT or TAPE REC.

Operation

Pre-Operation Checks

Instructions for setting faders and controls before powering on.

Volume Level Warnings

Cautionary advice regarding high volume levels and hearing protection.

Post-Operation Shutdown

Procedure for powering down the mixer after use.

Basic setting of the input channels

Preparation

Setting mono channel controls to mid-position.

Switching Channels to Subgroups or Master Output

Selecting routing for channels to subgroups or master.

Adjusting Input Channel Levels and Sound

Applying test signals and adjusting channel faders for monitoring.

Configuring the AUX send ways and activating the stage mode

Normal vs. Stage Mode for AUX Send Masters

Deciding between normal and stage mode for controlling AUX send masters.

Activating Stage Mode

Procedure for activating Stage Mode via recessed buttons.

Monitoring the channels

Monitoring Options Overview

Overview of channels/signals that can be monitored via headphones or monitor system.

PFL;SOLO Mode Selection

Using the LISTEN MODE button to select PFL or SOLO.

Monitoring Procedures

Steps for monitoring input channels, subgroups, master output, and multiple signals.

Volume Adjustment for Monitoring

Adjusting headphone and monitor system volume.

Specifications

Input and Output Specifications

Technical data for mixer inputs and outputs, including levels and impedance.

Performance Specifications

Frequency range, THD, S/N ratio, and equivalent input noise.

Equalizer and Phantom Power Specifications

EQ frequency ranges and phantom power voltage.

Power, Environmental, and Physical Specs

Power supply, operating temperature, dimensions, and weight.

Manufacturer Disclaimers

Notes regarding manufacturer data and subject to change.