Do you have a question about the IMG STAGE LINE STA-3000 and is the answer not in the manual?
Output power at 4 ohms | 2 x 1500 W |
---|---|
Minimum impedance | 4 ohms |
Frequency range | 20 Hz - 20 kHz |
Input impedance | 20 kOhms |
S/N ratio | > 100 dB |
THD | < 0.1% |
Inputs | XLR, 6.3 mm jack |
Power supply | 230 V AC, 50 Hz |
Power consumption, operation | 3000W |
Outputs | Speakon |
Cooling | Fans |
Describes controls and indicators on the front of the amplifier.
Details connections and switches on the rear of the amplifier.
Instructions for mounting the amplifier in a standard equipment rack.
Guide to choosing between Stereo, Parallel, and Bridge modes using DIP switches.
Configuration of the integrated crossover filter for different speaker types.
Procedure for powering the amplifier on and off safely.
How to set input signal levels and adjust volume controls.