IMG STAGE LINE STA-602 User Manual

BEDIENUNGSANLEITUNG • INSTRUCTION MANUAL • MODE D’EMPLOI
ISTRUZIONI PER L’USO • GEBRUIKSAANWIJZING • MANUAL DE INSTRUCCIONES
BRUGSANVISNING • SÄKERHETSFÖRESKRIFTER • TURVALLISUUDESTA
STA-602 Best.-Nr. 24.1360
PA-HOCHLEISTUNGSVERSTÄRKER
PA POWER AMPLIFIERS
AMPLIFICATEURS DE PUISSANCE PA
AMPLIFICATORI AD ALTA POTENZA PA

IMG STAGE LINE STA-602 Specifications

General

Total Harmonic Distortion (THD)	< 0.1%
Signal-to-Noise Ratio	> 100 dB
Inputs	XLR, 6.3 mm jack
Type	stereo
Frequency Response	20 Hz - 20 kHz
Input Sensitivity	1.4V
Power Supply	230 V AC, 50 Hz
Frequency Range	20Hz - 20kHz
Outputs	Speaker binding posts
Input Impedance	20 kOhm
Damping Factor	> 200

Summary

Operating Elements and Connections

Front Panel

Describes front panel controls, LEDs, and indicators for operation and status.

Rear Panel

Details rear panel connectors, fuse holder, and main power input for connectivity.

Applications

Installation

Rack Installation

Provides specific guidance on mounting the amplifier unit securely within a standard rack.

Connecting the Amplifier

Inputs

Explains how to connect audio sources like preamplifiers or mixers to the amplifier's input jacks.

Speakers

Covers speaker connection methods for both stereo and mono bridge configurations.

Stereo/2-Channel Operation

Details speaker connections via Speakon and binding posts for stereo mode, including pin assignments.

Mono Bridge Operation

Details speaker connections via Speakon and binding posts for mono bridge mode, including pin assignments.

Mains Connection

Operation

Switching On/Off

Procedure for turning the amplifier on and off, including protection circuit delay functions.

Adjusting the Level

Guide on setting output levels, using indicator LEDs, and avoiding potential hearing damage.

Protection Circuit

Technical Specifications

Important Safety Instructions