5
Installation
IMILAB Home Security Camera A1 can be placed on a number of horizontal surfaces,
such as a writing desk, dining table, and coffee table. It can also be mounted on the wall.
Mounted IMILAB Home Security Camera A1 on a Wall
1. Drill two holes on the wall by using the base of the IMILAB Home Security Camera A1
as a template. It is recommended that you mark the locations of the hole with a pencil
before drilling. The diameter of each hole is approximately 6 mm, and the depth is
approximately 30mm.
2. Insert the two plastic anchors into the holes on the wall.
To Next Page
Loading...
