Imit 546070 User Manual

21/9/2018 TA3 - TA3 A - TA3 B - TA3 C - Imit Control System s.r.l.
https://manimit.it/en/ta3-ta3-ta3-b-ta3-c-10/ 1/10
TA3 – TA3 A – TA3 B – TA3 C
COD. 546070
COD. 546030
COD. 546010
COD. 546230
PRODUCT DESCRIPTION
This is an easy-to-use MECHANICAL THERMOSTAT. It allows an accurate room temperature adjustment in the
hosting room, thus meeting any users’ needs as far as room comfort.
CONFORMITY TO THE STANDARDS
This product complies with:
EN 60730-1 and subsequen revisions
EN 60730-2-9
CONFORMITY TO THE GUIDELINES
This product complies with:
LVD 2014/35/EU
Class ErP I (+1%) – EU 811/2013
The product model and code (6 digits) are printed on the sticker on the outside or the inside of the battery
compartment cover. The manual may not be available in the selected language.

Imit 546070 Specifications

General

Brand	Imit
Model	546070
Category	Thermostat
Language	English

Summary

Product Description

Conformity

Conformity to Standards

Product complies with EN 60730-1 and EN 60730-2-9 revisions.

Conformity to Guidelines

Product complies with LVD 2014/35/EU and Class ErP I EU 811/2013.

Technical Specifications

Thermostat Control Keys

Optional Accessories

Installation

Placement of the Thermostat

Install away from heat sources, doors/windows, at approx. 1.5m height from the floor.

Installation and Wiring Connections

Recommended sub-base fitting for round boxes or uneven walls; fix with two holes.

Description of Controls and Operation

Turning the Thermostat On and Off

Use the ON/OFF switch on TA3-B to start or stop the equipment.

Temperature Setting

Set desired room temperature by turning the adjusting knob to the value on the graduated scale.

Temperature Range Restriction and Temperature Lock

Operations must be carried out by qualified personnel only.

Summer/Winter Switch

Switch on TA3-C for summer (AC) or winter (heating) operation mode.

Problem Solving

The system does not start

Check wiring, temperature setting, switch position, and summer/winter setting.

The ambient temperature does not correspond to the temperature set on the thermostat

Check thermostat positioning and seal conduits for air draughts.