IMKO TRIME-FM - Default Chapter; Table of Contents

2
Thank you for buying IMKO.
Should you have any queries please don’t hesitate to contact your local distributor or address directly
to:
IMKO Micromodultechnik GmbH
Im Stoeck 2
D-76275 Ettlingen
Germany
Phone: +49-7246-5921-0
Fax: +49-7246-90856
e-mail: info@imko.de
internet: http://www.imko.de
as of April 15
th
, 2001
Table of contents
1
TRIME-FM2 /-FM3 Field Measurement Device (Version P2 or P3) _____________________3
1.1 Functional Description ______________________________________________________3
1.1.1 Manual Operation _________________________________________________________________________ 3
1.1.2 Probe Connection _________________________________________________________________________ 3
1.1.3 Basic Alignment___________________________________________________________________________ 3
1.1.4 Display Functions / Error Messages ___________________________________________________________ 3
1.1.5 Battery Operation _________________________________________________________________________ 4
1.1.6 Battery Charger ___________________________________________________________________________ 4
1.1.7 External Power Supply _____________________________________________________________________ 4
1.1.8 Data Logger Operation _____________________________________________________________________ 4
1.1.9 PC-Connection via RS232___________________________________________________________________ 4
1.1.10 Technical Data _________________________________________________________________________ 5
1.2 Probe Dimensions _________________________________________________________6
1.3 Preparation Rods __________________________________________________________7
1.4 Mounting of Spare Rods with O-ring Seals_______________________________________ 8
2 The TRIME-T3 Tube Access Probe ______________________________________________ 9
2.1 Introduction_______________________________________________________________9
2.2 Measuring Field ___________________________________________________________ 9
2.3 Measuring experiences_____________________________________________________ 10
2.4 Summary _______________________________________________________________11
3 Access Tubes and Augers ____________________________________________________12
4 Instructions for Access Tube Installation ________________________________________13
4.1 Fixing of the rubber bung ___________________________________________________13
4.2 Inserting T3 into the TECANAT tube __________________________________________14
5 Basic Alignment with the Calibration Set ________________________________________ 15
5.1 What is a basic alignment?__________________________________________________ 15
5.1.1 What are the benefits of the calibration set for the user? __________________________________________ 15
5.2 How to make the basic alignment?____________________________________________ 16
5.2.1 Preparation of the glass beads ______________________________________________________________ 16
5.2.2 Basic alignment procedure _________________________________________________________________ 16
6 EMV/EMI Precaution _________________________________________________________ 18
7 Instructions for Wiring _______________________________________________________ 19
7.1 Water tight connectors and cable confection for use with the environmental measurement
system ENVIS ___________________________________________________________ 20
8 Operating instructions ACS-series _____________________________________________ 21