Immergas Code 3.030863 - Page 19

19
Information Menu
Menu item Description
Return temperature 2 Temperature read by the return sensor of the backup generator
DHW Setpoint DHW Setpoint
DHW Temp. Temperature read by DHW probe
Board rmware ver. System rmware revision
Display rmware ver. Zone Remote Panel rmware revision
User Menù
Menu item Description Range
Customised
value
HP Disable It allows to disable the heat pump according to the set time slot Yes / No
HP Disable Start Allows to set when disabling starts 0 - 23 h
HP Disable End Allows to set when disabling ends 0 - 23 h
Dehumication Disable
Disabling of request to the dehumidier, according to the daily
time slot
Yes / No
Dehum. Disable Start Time of dehumidication request disabling phase start 0 - 23 h
Dehum. Disable End Time of dehumidication request disabling phase end 0 - 23 h
CH min. set Minimum ow temperature for heating 20 ÷ 85 °C
Cooling min. Set Minimum ow temperature for cooling 5 ÷ 25 °C