Immergas Code 3.030863 - Page 23

23
11. TECHNICAL CHARACTERISTICS
• Dimensions (LxHxD): ....................................................................................................................................128 x 98 x 36 (mm)
• Power Supply: ........................................................................................................................................24V nominal (12V...24V)
• Maximum input:................................................................................................................................max 10 mA (max 250 mW)
• Functioning room temperature: ....................................................................................................................................0 - +50°C
• Warehouse temperature: ..............................................................................................................................................-10 - +60°C
• Protection rating according to EN 60730: .................................................................................................................................. II
• Protection rating according to EN 60529: ............................................................................................................................ IP 20
• Power supply electrical features: ............................................................................................................. polarised bipolar cable
• Communication electrical features: ....................................................................................................... polarised bipolar cable
• Connection cable max. length: ............................................50 m (with cable 2x0.75mm
2
) (0.5 ÷mm
2
min - 1.5 mm
2
max)
• Precision indication room temp.: ................................................................................................................... +/- 0.5°C at 25°C*
• Humidity probe accuracy: ............................................................................................................................................... +/- 10%*
• Clock indication diversion ........................................................................................................................... +/- 15 minutes/year
* = the indications of the room temperature and humidity can be aected by the point of installation of the Zone Remote
Panel (e.g. hot wall, cold wall, height from the ground, etc.)
11.1 Product sheet.
In compliance with Regulation 811/2013, the class of the temperature control device is:
Class
Contribution to room central heating
seasonal energy eciency
Description
V
+3% Zone Remote Panel
VI +4%
Zone Remote Panel combined with external probe