22
Service Menu -> System denining
Menu item Description Range
Customised
value
External probe Enables operation with the external probe Yes / No
Service Menu -> Device conguration
Menu item Description Range Default
Customised
value
Slave address
Address to congure according to the zone where
the device is installed (e.g.: zone 1 = 41, zone 2 = 42,
zone 3 = 43).
1 ÷ 247 41
Baud rate Communication speed
9600 /
19200
9600
Parity bit Parity bit
None /
Even /
Odd
Even
Stop bits Stop bits 0 / 1 / 2 1
The device must be configured in accordance with the
indications in the installation part of the technical
documentation of the devices to which a Remote Panel can
be connected.
To Next Page
Loading...
