Immergas Code 3.030863 - Page 21

21
Insert the relative access code and customise the parameters
according to your requirements.
Service Menu
Menu item Description
Denition of zone Zone Remote Panel sub menu settings
System dening Sub menu to dene the devices connected to the device
Device conguration Sub menu to set the device's conguration
Factory settings Default settings restore sub menu
Service Menu -> Denition of zone
Menu item Description Range
Customised
value
Enable Room thermostat Displays the enabling of the room thermostat control Yes / No
Modulating Room Probe Modulation enabled with Room probe Yes / No
Room Antifreeze temp. Room antifreeze activation temperature 0 ÷ 10 °C
Enable dew point Enabling setpoint correction by dew point calculation Yes / No