Need help?Do you have a question about the Immergas EOLO MYTHOS DOM 10 1E and is the answer not in the manual?
General| Category | Boiler |
|---|---|
| Fuel Type | Natural Gas |
| Power Output | 10 kW |
| Nominal Heat Output | 10 kW |
| Control | Electronic |
| Mounting | Wall-mounted |
| Modulation | Yes |
| Electrical Supply | 230 V |
| Combustion | Sealed chamber |
| Water Pressure | 1.5 bar |
Explanation and meaning of various safety symbols used in the manual.
Details on required personal protective equipment for safe handling.
Important safety advice, liability disclaimers, and product suitability notes.
Key advice for installing the boiler correctly and safely.
Rules and regulations governing boiler installation locations and materials.
Specific prohibitions and requirements for installation environments.
Diagram and table detailing the physical dimensions of the boiler.
Diagram specifying required clearances around the boiler.
Information on the optional kit for hydraulic and gas connections.
Guidelines for connecting the gas supply, including safety checks.
Instructions for making hydraulic connections and system water treatment.
Details on gas supply purity, storage, and system integration.
Procedures for electrical connection, safety warnings, and cable requirements.
Instructions for connecting and using digital chrono-thermostats and remote controls.
Manufacturer recommendations for flue system installation and materials.
Data on flue component resistance for system design.
Guidance on installing diaphragms for proper boiler operation.
Specific instructions for installations with divided terminals.
Tables specifying diaphragm and pipe extension limits.
Detailed table of resistance factors for various flue duct types.
Steps for installing the Ø 60/100 concentric horizontal flue kit.
Information on extending the Ø 60/100 horizontal flue system.
Steps for installing the Ø 80/125 concentric horizontal flue kit.
Instructions for installing the Ø 60/100 concentric vertical flue kit.
Information on extending the Ø 60/100 vertical flue system.
Instructions for installing the Ø 80/125 concentric vertical flue kit.
Step-by-step guide for assembling the Ø 80/80 separator kit.
Clearances and extension limits for separator kit installations.
Considerations for temperature loss in flue pipes.
Table detailing maximum lengths for insulated and non-insulated flue pipes.
Instructions for assembling and installing insulated separator kits.
Guidance on temperature loss and limitations for insulated flue ducting.
Principles and requirements for using ducting systems for flue evacuation.
Installation requirements for Type B open chamber configurations.
Rules for connecting flue exhaust to chimneys or terminals.
Compliance standards for flues, chimneys, and caps.
Guidelines for positioning wall exhaust terminals.
Rules for direct flue gas exhaust in specific enclosed environments.
Steps for filling the system and water treatment precautions.
Procedure for starting up a new gas system.
Steps for commissioning and starting the boiler.
Details on the circulation pump, release, and by-pass adjustment.
Overview of optional kits available for purchase and installation.
Illustrated diagram identifying all major boiler components.
Essential safety advice for the user regarding appliance operation.
Specific safety measures for users, including children and restricted capabilities.
Key safety rules for operating electrical components of the appliance.
Warning about the risk of burns from hot water.
Immediate actions to take if a gas leak is detected.
Steps to follow in case of burning smells or smoke from the appliance.
Proper procedures for disposing of the appliance at the end of its service life.
Step-by-step guide for igniting the boiler.
How the boiler operates when connected to a remote control.
Detailed table listing error codes, their causes, and recommended solutions.
Accessing and navigating the menu to view boiler operating parameters.
Procedure for clearing the boiler's anomaly history.
Instructions for safely shutting down the boiler.
Checking and restoring the correct pressure in the heating system.
Steps for draining the heating system and related warnings.
Instructions for cleaning the external casing of the boiler.
Procedure for permanent shutdown and decommissioning.
Safety warnings specifically for personnel performing installation.
Essential safety steps before performing any maintenance operation.
Comprehensive checklist for the initial start-up and commissioning of the boiler.
Routine checks for system PH, heat exchanger, burner, and operation.
Verification of thermostats, electrical switches, and control devices.
Checks for gas circuit tightness and system water leaks.
Inspection of safety valves, expansion vessel, and pressure switches.
Verification of the condition and integrity of the electrical system.
Table detailing common problems, their causes, and solutions.
Procedure for converting the boiler to a different gas type.
Steps for accessing and performing gas valve calibration.
Procedure for adjusting the boiler's nominal heat output.
Procedure for adjusting the boiler's minimum heat output.
How to access and perform calibration corrections.
Table and guide for programming various PCB parameters.
How to activate and use the chimney sweep function for checks.
Explanation of the heating timer and its adjustment.
Description of anti-block functions for the three-way unit and pump.
Information on the PCB's periodic self-checking function.
Tables detailing variable heat output for different models.
Tables showing combustion parameters for various gas types and outputs.
To Next Page
