Introduction
The rapidFIRE 5.8GHz Goggle Module is a high performance receiver designed for the FPV market.
Unlike traditional diversity receivers, the rapidFIRE includes sophisticated hardware which ‘fuses’
together the image from two antennas, and digitally reconstructs the image, with no additional
latency.
Designed to give the best possible video quality in indoor arenas where multipathing is a big issue,
and also in outdoor environments where maximum video range is required.
Anatomy of a rapidFIRE Module
The rapidFIRE module follows the FatShark recommendations for an Rx module compatible with both
Attitude, and Dominator goggle families.
Two SMA ports are provided, labelled in the User Interface as ‘Upper’ and ‘Lower’.
To Next Page
Loading...