All Done, Time To Fly
At this point in the Getting Started manual, the Vortex should be ready for its maiden flight.
The Wizard has setup the flight controller with our default Pro-Tune, generated by one of our
expert team pilots. PIDs and gains are unlikely to require major changes to achieve precise
flight.
If the props were removed during setup (as we highly recommend), please re-install taking
care of the prop directions below:
Take it easy for the first few LiPos, and get used to your new Vortex.
P.S. To arm the flight controller after running the wizard, for mode 2, move the throttle
stick down and to the right. See ‘Flight Controller Stick Commands’ in the main manual.
The ImmersionRC Team wishes you many hours of enjoyment with your new Race Quad, and
welcome any feedback that you may have at: feedback@immersionrc.com
The Getting Started Manual should have got you airborne. It is a good idea to read the full
Instruction Manual also, which contains many more details than this abbreviated manual.
To Next Page
Loading...