Need help?Do you have a question about the Immersion RC Vortex and is the answer not in the manual?
Guide on selecting and installing the correct battery for the Vortex quadcopter, covering voltage, capacity, and C rating.
Instructions for installing compatible radio control receivers, including options for EzUHF, DSM, Futaba, and FrSky.
Steps to configure the video transmitter settings, including channel and band selection, using the OSD.
Process for initial setup and configuration using the Vortex's onboard Tx Setup Wizard.
Explanation of Mode 2 control stick configuration, common in the USA, for throttle, yaw, pitch, and roll.
Explanation of Mode 1 control stick configuration, common in Europe, for throttle, yaw, pitch, and roll.
Instructions for calibrating flight controls and accelerometer by moving sticks as prompted by the wizard.
Details on configuring flight modes (Acro, Horiz, Angle) via CH5 and setting up receiver failsafe.
Details on the flight controller (IMU, Altimeter, CPU) and OSD (CPU, Resolution, Style).
Information on the 5.8GHz transmitter module, channels, bands, frequencies, and power output.
Specifications for props, motors, and recommended batteries for the Vortex.
ESC type, receiver requirements, flight characteristics like time and speed, and camera support.
Details on the weight (Shipped, RTF) and physical dimensions of the Vortex quadcopter.
Guidance on obtaining support through resellers and online forums like FPVlab.com.
Important notices regarding RF regulations, safe operation, and potential hazards.
Information on warranty claims and links to ImmersionRC's social media presence for updates.
General| Brand | Immersion RC |
|---|---|
| Model | Vortex |
| Category | Quadcopters |
| Language | English |
To Next Page