Need help?Do you have a question about the ImmersionRC Tramp HV and is the answer not in the manual?
Details on antenna impedance, connector, power output, channels, pit frequency, and glitching.
Physical dimensions and weight of the transmitter.
Specs for audio/video connector, pinout, modulation, and audio handling.
Details regarding the connector for the Touch'n'Race feature.
Voltage requirements and power consumption of the device.
Storage and operating temperature ranges.
Explanation of the Touch'N'Race feature for event management and pilot registration.
Guidance on handling fragile connectors and RF cables to prevent damage.
Recommendations and warnings regarding power supply connections.
Importance of airflow for thermal management and performance.
How to prevent ground loops for cleaner video signals.
Mounting advice for the TNR board for accessibility by race marshals.
Information on SMA vs RP-SMA connectors and potential compatibility issues.
Overview of the transmitter's user interface elements, including buttons and LEDs.
Instructions for configuring channel, band, and power using the button and LED.
Steps to manually exit Race Mode after an event.
Procedure for selecting the transmission channel via the UI menu.
Procedure for selecting the transmission band via the UI menu.
Procedure for setting the transmission power level via the UI menu.
Overview of available frequencies for the EU version across different bands.
Explanation of the transmitter's internal temperature monitoring and power adjustment.
Interpreting blink patterns on startup for TNR device detection and data issues.
Diagnosing why the LED does not light up during power-up, likely due to supply voltage.
General| Video Format | NTSC / PAL |
|---|---|
| Weight | 10 g |
| Connector Type | MMCX |
| Frequency | 5.8 GHz |
| Channels | 40 |
| Control | SmartAudio |
To Next Page