The plastic pins and circlips installed into each of the dampers are important, and prevent the
camera mounting plate from being separated from the frame in a crash.
NOTE :It is important that all four of these pins are installed before every flight. Flying with
fewer pins installed may result in damage in a crash.
HD Camera (GoPro/Mobius)
The camera mounting plate also includes slots used to secure either a GoPro, or Mobius
camera.
Note that this mounting mechanism doesn’t provide support for significantly tilting the
camera, which is required to keep the horizon in the center of the image during high-speed
flight.
Two optional kits are available from ImmersionRC resellers which achieve this, the GoPro
Recliner (P/N: VXUPGGP) and the Mobius Incliner (P/N: VXUPGMOB).
To Next Page
Loading...
