Need help?Do you have a question about the ImmersionRC Vortex and is the answer not in the manual?
Used to configure flight controller and upgrade Vortex firmware. Requires battery.
Used to change Video Tx band and restart the wizard.
Used to enter firmware update mode.
350mW 5.8GHz Custom NexWaveRF module, 25mW version later.
3-pin Picoblade connector for flight camera video and power.
2-pin Picoblade connector for powering a GoPro.
3-pin JST-PH connector for receiver PPM signal.
Connector for connecting the battery. Extreme care with polarity.
Suspended from dampened carbon fiber plate, reduces Jello effect.
Plate includes slots for GoPro or Mobius cameras.
Displays status information on power-up before sticks are moved.
Accessed by holding throttle stick down and left; navigated with pitch/roll stick.
Details on Landscape, Pseudo, Pack Capacity, Beeper Freq.
Enables/disables alarms for Battery mAh, Battery mV, UHF Status, Flight-Time.
Details on LED modes like Intensity, Frequency, and Gradient.
Adjusts PID values for Roll, Pitch, and Yaw.
Configuration for RC rates, expo, rates for Roll, Pitch, Yaw, and Throttle.
Settings for LoopTime and PID Controller.
Details on IRC/FS, RaceBand, and other band frequencies.
Illustrates different R/C transmitter control modes (Mode 1, 2, 3, 4).
Advanced mode, no self-leveling, good for flips and rolls.
Easiest to learn, auto-levels the quad. Good for maiden flight.
Hybrid mode, auto-levels but allows flips and rolls.
How to connect to the Cleanflight Configurator via USB.
Stick commands to enter menu or disarm the flight controller.
Stick commands to arm the flight controller.
Stick commands to reset the Video Tx channel.
Feature to program motor rotation sense easily.
Option to load profiles based on pilot, props, battery, and style.
Explains the origin and concept of the gaming mode.
Details how the altimeter is used to score points based on altitude.
Steps to enable and configure the gaming mode in the OSD menu.
Shows the 'Get Ready' screen and the in-race display elements.
Displays race results including time, altitude, and points.
Rules include not landing near pilots, not walking with powered-up quad, and warning others.
Step-by-step guide to updating the OSD firmware using PC tools.
Instructions for upgrading Flight Controller firmware using Cleanflight Configurator.
Settings for PPM output, servo channels, and UPSTAT on the EzUHF receiver.
Lists default Failsafe, OneShot125, Rx Mode, and tuning settings.
Legal frequency bands for Americas, Greenland, and Pacific Islands.
Legal frequency bands for Europe, Africa, Middle East, Iraq, Soviet Union.
Solutions for ground view, unpredictable yaw, and flip-on-takeoff issues.
Discusses OSD text clarity and potential firmware fixes.
Recommendations for handling water, sun exposure, and dirt.
A humorous warning about protecting the Vortex from friends.
Specs for Flight Controller, OSD, Video Tx, and Power Train.
Specs for ESC type, rating, processor, and R/C receiver requirements.
Flight characteristics, weight, and size specifications.
Comprehensive list of part numbers for crash kits, props, ESC, etc.
Guidance on contacting resellers and ImmersionRC support channels.
Recommendations for safe operation and flying practices.
Links to ImmersionRC's Facebook, Google Plus, and Twitter pages.
General| Brand | ImmersionRC |
|---|---|
| Model | Vortex |
| Category | Drones |
| Language | English |
To Next Page
