Troubleshooting / Known Issues
Q. When I fly, all I see is the ground
A. Tilt the flight camera up! (but beware that landing with a heavily tilted flight camera
can be more of a challenge)
Q. My quad appears to have unpredictable yaw in tight turns
A. This can be due to a number of reasons. First thing to check though is that the motors
are all aligned correctly (look through the side of the quad and ensure that props are
parallel with the top frame).
Another common reason is PID tuning related, try one of the Pro-Tunes.
Q. My Vortex flips instead of taking off
A. Check that the correct props (CW vs. CCW) are installed in the correct locations.
Also check that the props rotate in the correct direction, and run RotorSENSE on each
motor that needs reversing.
Q. My OSD text is not as crisp as it was on my original EzOSD
A. Yes, we are aware of this, it is not very visible in goggles, but can be on a larger
external monitor. A firmware fix is in the works, and will be released shortly.
To Next Page
Loading...