How to Fold your Immotor GO
from Power Assist to Stand By
Stand-ByPower Assist
1
2
3
STEP 1
1) Press the square button behind each handle bar to release and
fold them down until parallel with the stem.
2) Lift up the “T” handle. While holding it, press the red button
under “T” handle to release and push down until retracted fully
into the main body.
3) Lift the trigger latch to release rear wheels and fold/lock the
wheels into Stand-By mode.
*Tutorial videos are available on the App and at www.immotor.com
To Next Page
Loading...