How to Fold your Immotor GO
from Ride to Power Assist
Power AssistRide
1
2
3
STEP 1
1) While holding the “T” handle or handle bars with one hand,
step on the foot latch located where the footboard meets the
body to release the hinge.
2) Lower the whole body to connect to the footboard - press
down on body until it clicks into place.
*The body should now be connected/latched to the footboard.
3) Using “T”handle or handle bars, lift GO upwards again until it
stands and wheels lock into Power Assist mode.
*Tutorial videos are available on the App and at www.immotor.com
To Next Page
Loading...