Impac DA 6000-N - 1 Scope of Delivery; 2 Design Features of the da 6000-N Digital Display

To Next Page

To Previous Page

Congratulations for choosing this high performance IMPAC Digital Display. You

now have a compact instrument which not only displays but can also control and

regulate your measurement process.

Please read this manual carefully before installing the digital display. It contains all

of the information necessary to set up and operate the new device.

Should you require further assistance, please call our customer service hotline in

Germany +49 (0)69 973 73-190.

IMPAC has been developing and manufacturing non-contact temperature meas-

urement instruments since 1958 and has more than 60 000 pyrometers and sys-

tems installed worldwide.

IMPAC Electronic GmbH

1. Scope of delivery

− DA 6000-N digital display with screw clips

2. Design features of the DA 6000-N digital display

− Interface connection (selectable for RS232 or RS485) for communication with digital pyrometers

− Power supply requirement of either 85 - 265 V AC or 18 - 30 V DC

− Program set-up parameters of digital pyrometers

Safety Note:

Please be sure that the mains cable connections are sufficiently protected from contact!